This flat drip irrigation tape coiler is used to coil the drip irrigtaion tape diameter from 12mm to 22mm, which has the function of automatic coil, automatic cutting, automatic reel change, this coiler is specially designed for high speed drip irrigation tape line with speed 150m/min-300m/min, it is controlled by Siemens PLC control system, all the parameter such as coil speed, coil current length, total coil length, traversing position, etc can be displayed on the touch screen, easy to operate, also equipped with dancer system to adjust the speed automatically.

This SGJ-1700 Pipe Winding Machine is designed for 20mm-63mm HDPE Pipe production line. It can be manufactured as double working position, also can be manufactured as single position for saving cost,the line speed can be customized, with range of 10m/min-60m/min. The Siemens Servo Traversing unit was installed on this coiler, and roll length can be setted on the display screen, the coiled length will be 300M-100M, the coiler roll ID and width can be customized design and adjusted flexible.

This automatic pipe coiler is mainly used to coil the PE pipe, PE-RT pipe, PE-Xb pipe, oxygen barrier EVOH pipe at high line speed such as 40m/min-80m/min, it is fully automatic type, no need operator to do the job of reel changing and coil unloading. KAIDE is the earliest manufacturer in China, who start to research and develop automatic coiler, this coiler has been sold to many pipe factories, such as +GF+ Georg Fischer,ERA pipe group, Junxing Pipe Group, Rifeng Pipe Group, VESAN Pipe Group, Chinaust, RH Pipe factory, etc. The automatic coiler still adopts servo traversing system and PLC intelligent control; It can realize a series of intelligent operations, such as automatic pipe accumulating, automatic coil cutting and new coil changing, automatic brake etc,

HDPE micro-duct bundles extrusion line is combining one or more micro ducts in a certain arrangement order and coats them together into one tube with outer sheating layer.
According to the inner tubes different combination mode, machine can be devided as: DB, DI microduct bundles extrusion line, link-duct bundles extrusion line, and flat-duct bundles extrusion line.
The thick walled microducts also can be called DB microduct bundles line, inner pipes can be grouped as 1way to 24+1 way. Link/Flat duct bundles making machine group ducts 1 way to 7 ways. Inner tube diameter of 5-20mm.
The produced microduct bundles are widely used in global communication fields such as fiber to the home(FTTH), FTTx, etc. Bundles should be done underground or on existing infrastructure. The bundles achieve to place more communication tubes in a limited space, which can solve the problem of limited space in cities or suburbs to the greatest extent.

The Pipe Winding Machine is used to coil the pipe, such as PE, PE-RT, PEX, Drip Irrigation Pipe,PERT-AL-PERT Pipe, etc, the pipe diameter range is usually 16mm to 32mm, line speed is 15m/min-60m/min, this pipe winder was equipped with ultrasonic dancer to adjust the coil speed automatically, the traversing unit adopts Siemens servo motor driven,which can make the final coils in well displacement and neat. The winder is controlled by separate Siemens PLC Control system, The coiling pipe length and the current pipe length can be displayed on the screen on real time, which is intelligent and convenient operation.

Below Pipe Production line is used to make cross-linked PEXb pipes. The production speed is up to 30m/min.
The extruder screw and die head are special designed as per PEX cross-linking features. The line can achieve high speed production, and also prevent over crosslinking or degeneration problem of PEX material while extrusion.
Difference with PEXa pipe, the PEXb is made using silane or moisture cure method of cross-linking. The links between molecules of HDPE form after extrusion process using a catalyst and exposing the PEX pipe to hot water or hot steam container.